eSUN ePAHT-CF Filament, 1.75mm, natural, 0.75kg/roll

Description:

A material based on PA6 developed by eSUN and LUVOCOM, added 15% high-rigidity carbon fiber, high-strength, high-rigidity, mechanical and thermal properties are higher than other eSUN nylon series products; it can be substituted in many occasions Metal use; the continuous use temperature of the parts can reach 150℃, and the short-term use temperature can reach 180℃; low shrinkage, not easy to warp and crack during printing, the surface of the printed item Matte and delicate.

Sellingpoint:

High strength
High toughness
High rigidity
High impact resistance
Chemical resistance

Heat resistance
Abrasion resistance

Matte surface effect

Excellent printability

Notes:

1. ePAHT-CF needs to be dried (70℃/＞12H) before printing to achieve the best printing effect. It is recommended to use it with the eBOX cartridge when printing.
2. The ePAHT-CF line has strong rigidity and is not easy to bend. In the feeding pipe, excessive bending of the wire should be avoided as much as possible.
3. ePAHT-CF is very easy to grind nozzles and extruder gears. It is recommended to use hardened steel nozzles or ruby nozzles. If conditions permit, you can choose hardened steel extruder gears. If the printing time is long, you need to replace the throat and nozzles.
4. It is recommended to set the skirt to make it better for taking the model from the forming plate.

Filament Properties Table
3D PRINTING FILAMENT	ePAHT-CF
Density(g/cm3)	1.4
Heat Distortion Temp(℃,0.45MPa)	190
Melt Flow Index(g/10min)	19.68(270℃/2.16kg)
Tensile Strength(MPa)	173.37
Elongation at Break(%)	8.93
Flexural Strength(MPa)	171.64
Flexural Modulus(MPa)	5612.41
IZOD Impact Strength(kJ/m2)	12.74
Durability	10/10
Printability	8/10
Recommended printing parameters
Extruder Temperature(℃)	260 – 300℃ Recommended temperature：280℃
Bed temperature(℃)	45 – 60°C
Fan Speed	0%
Printing Speed	40 – 100mm/s
Heated Bed	Optional
Recommended Build Surfaces	Masking paper, PVP solid glue, PEI
Feature
Flexible	——
Elastic	——
Impact Resistant	√
Soft	——
Composite	√
UV Resistant	——
Water Resistant	——
Dissolvable	——
Heat Resistant	√
Chemically Resistant	√
Fatigue Resistant	——
Need drying	√
Heated Bed Required	——
Print recommend	Drying at 70℃/>12h, using hardened steel, ruby ​​nozzle